bend/foldable plastic

[DStanley1809]

Polycarbonate was my first guess but I looked up bus shelters and motorsport windows and came up with perspex lol

[alga]

Lexan? Mylar?

[Talonmotorsport]

Just found the answer on another forum, stuff I am looking for is lexan. You can slighty over bend it cold and it will keep it's shape. Ideal for making curved light covers like on a Fisher Fury,Deano,TVR etc. Thanks for all your efforts.

[DStanley1809]

Isn't Lexan just a trademarked brand of polycarbonate?

[Talonmotorsport]

To be honest I'm not sure if it's a trade name or not, all I know is that some polycarb. does not bend and tends to shatter when you bend it in a V die on a brake press.

[Davey]

Lexan is a trade name as far as I'm aware but it is not just ordinary polycarbonate, its damned near indestructible which is why its used in bus stops etc. I was once asked to try and destroy a piece to demonstrate its toughness, it withstood 15 minutes of battering with a four pound lump hammer. it was badly deformed but didn't break.

D.

[RAYLEE29]

Makrolon is made from polycarbonate we used to use it for power press guards its immensely strong and can be bent too.
if you need to bend 180 degrees you prob need to talk to a plastic specialist
Ray

[tex]

lexan is pretty tough stuff - i bought some 4mm smoked for the top part of my custom made doors on the dax - looked pretty cool. bare ally on the bottom

[trickydicky0_16]

lexan is a trade name for polycarb,it can be bent on a press brake though you might need to over bend it if you want 90 degrees, it also can be punched on a punch press


cheers

tricky

[flyerncle]

As Ray say's Makrolon is the dogs bits,the right grade is bullet proof the piece I tried took a .357 magnum and just dented it.