|
|
#3
16th October 2010, 07:12 PM
|
||||
|
||||
Question: what can you do with bolt on drive shafts?
 You can make the stock ford+bmw parts up to 4" wider using spacers between the CV joints and drive flange on the diff end. Bigger off set wheels will also help with the addition of spacers between the hubs and wheel face. The other thing is you don't need a 125mm wide transmision tunel for a 50mm drive shaft.
__________________
Website http://www.talonmotorfabrication.co.uk/ Direct email phil@talonmotorfabrication.co.uk talonmotorfabrication@gmail.com Mobile office hours 07514098334 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode