|
|
|
|
#1
3rd March 2011, 10:22 AM
|
|||
|
|||
Just picked up a set while visiting Phil at Talon and can confirm they are top quality! Should snap up a bargin while you can. Also there is a group buy going atm for a full set and Uprights.
|
|
#2
3rd March 2011, 11:40 AM
|
||||
|
||||
|
have talon got a website?
i hope you dont mind me asking how much were they?
__________________
My Blog: deannoshaynesroadster.wordpress.com (under construction) Being overtaken is a sign of weakness. South Wales Kit Car Club www.southwaleskitcarclub.co.uk WWW.HELPFORHEROES.ORG.UK XBox Gamer tag: D34NNO
|
|
#3
3rd March 2011, 12:39 PM
|
||||
|
||||
|
Hi Dean
Personaly, I would use the ERW tube that you have available at work, especialy if it comes free  3mm wall thickness ERW tube will more than compensate for the seam. The original lo-cost used 1.6mm ERW for the wishbones, plenty of those on the road  I will have a full set of wishbones available shortly .... When I dig my jigs out to fabricate my own new set. One lucky forum member will get an absolute bargain that's for sure Talon trades soley from his ebay store & I hope he won't mind me saying, has a rather limited range of products listed at any one time 
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie www.roadster-builders.co.uk
|
|
#4
3rd March 2011, 12:44 PM
|
||||
|
||||
|
Fogot to mention, if you want to get some seamless tube for the lower wishbones you can have a look here
1" CDS Tube
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie www.roadster-builders.co.uk
|
|
#5
3rd March 2011, 12:45 PM
|
||||
|
||||
|
you have a PM
__________________
My Blog: deannoshaynesroadster.wordpress.com (under construction) Being overtaken is a sign of weakness. South Wales Kit Car Club www.southwaleskitcarclub.co.uk WWW.HELPFORHEROES.ORG.UK XBox Gamer tag: D34NNO
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
