|
|
|
|
#2
10th June 2011, 09:06 AM
|
||||
|
||||
Good luck David. Let us know how you get on.
|
|
#3
10th June 2011, 09:22 AM
|
|||
|
|||
|
good luck today fella,
Hope it goes well!
__________________
Build Cost so far £xxx (Given up adding it up) - She Starts!! Build Thread Here: http://www.haynes.co.uk/forums/showthread.php?t=5501
|
|
#5
10th June 2011, 05:47 PM
|
||||
|
||||
|
Not good news im affraid. Emmissions were miles out, it doesnt seem to be firing properly on cylinders 1 and 4, and plug 4 had some oil on it when we looked at them. Think the headgaskets gone.
Also, the brake master cylinder tank seal has a leak. There was a few bits of edge trim etc that could have been done on the day, but not worth it because of the emissions. All in all, not a bad fail, could have been worse.  Big big thanks to the boys at Saturn for all their help and time. Really appreciate it!
__________________
~ My Build Diary - http://davesroadster.blogspot.com/ *updated 7/6/11* Best bit so far: Getting it running Worst bit so far: Cutting steel for wishbones and engine mounts. Most annoying bit so far: Generator packing up half way through welding.
|
|
#7
10th June 2011, 06:16 PM
|
||||
|
||||
|
Free if i can get it done within 5 days... not gonna be easy!
__________________
~ My Build Diary - http://davesroadster.blogspot.com/ *updated 7/6/11* Best bit so far: Getting it running Worst bit so far: Cutting steel for wishbones and engine mounts. Most annoying bit so far: Generator packing up half way through welding.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
at least its only £90 next time around 
Hybrid Mode
