How? Fixing the dash Panel.

[robo]

Originally Posted by Yodi

Thanks, looks a good idea I found some on ebay they are very cheap

http://www.ebay.co.uk/itm/CD-Weld-St...em3c cabe84cb

My only concern is that the thickness of the head will move the carbon away from the dash securing piece

Originally Posted by twinturbo

use some 2mm neopreen self ahdeasive strip between the scuttle and dash

TT

As Rob said or you could lose the head of the stud in the carbon to form a small pocket with a spot weld drill. It might pay to go for an 8mm stud to get a decent area to bond too. It might not pull the suface in so much when tightening with an 8mm stud

http://www.matcotools.com/ProductImages/TH7778.jpg

Bob