25mm or 1in?

[iDriver]

Originally Posted by will_08

Hey Mark

Welcome to the forum mate, my handhandy flat pack was 25x25x2mm.

He did offer 2mm or 1.6mm, but i went for the thicker tube.

Thanks for that Will, if it’s good enough for Andy its good enough for me and should reduce the number of blow through with the mig welder :-)

I would have gone the route of buying a kit off Andy just for because it’s easier than transporting/storing/cutting free lengths. However, from what I read on here Andy has either health or personal issues that appear to have taken him away from production, so it will have to be the traditional route.

Mark