Stots Build Thread

[Stot]

a wee update. I needed to strip the rear uprights completely and I had a seized bolt stuck in one of them. I had cut the bolt to remove the upright from the wishbone.

I spent an age trying to get the damn circlip out of the upright and in the end took an old set of vice grips and welded them to the circlip!




Came out in seconds and i pressed the bearings out with a 12 ton press.




Ready for final blasting an painting.

[Stot]

Next up the seized bolt.



I center drilled it on the mill and then used a dead center in the press to free it up and a long socket to push it through.





It went with a bang.

[Stot]

I drifted it out the rest of the way.




Another job done.

Cheers
Stot

[Stot]

Got the rear drivetrain bits blasted and painted. These are first coat pictures but I did the second coat this morning so they are done.





I have new bearings, brake seals, ball joints etc to go on. Be rolling soon...

Cheers
Stot

[skov]

Nice work!
I gave up trying to remove the bolts out of my rear uprights and bought another pair with them pre-removed

[Stot]

Originally Posted by skov

Nice work!
I gave up trying to remove the bolts out of my rear uprights and bought another pair with them pre-removed

Its definately handy having some big tools kicking around! If I hadnt been able to push it out I was going to mill it out but I managed to save the mess.

Cheers
Stot

[Eternal]

Nice work Looking forward to seeing more!