mx5 diff problems

[skov]

Originally Posted by Short

On another note, can I ask why you revised the handbrake plate at the back of the tunnel a few times? im setting mine up now, and I cant see any problems. it cant be that easy can it?

I changed it because I didn't like the angle of the cables at that bracket.
With the bracket following the seat backs the cable outers point upwards into the tunnel, but the inners have to go down to the lever.
Think it took me a few attempts to get it right without the cables rubbing on the chassis, or the plate bending too much.
Probably would have been fine the way it was originally