David's Build Thread

[Davidbolam]

Tonight I spent a bit of time making my dashboard. It just needs to be fitted into the car. The bolts are being reached by some black dome headed bolts as soon as they arrive from ebay.

I will eventually put in a carbon fibre dash as soon as someone makes one wide enough with the radius on the bottom.

I'm almost happy with the result. I wasn't going to use the padding underneath but when I measured my radius I was slightly under the 19mm so don't want to risk it at iva.

Here is a photo.....




I will post a photo of it in place and that will be the interior finished apart from the harnesses (not enough in piggy bank / car fund) at moment for those.

David