|
|
#5
4th May 2014, 11:41 AM
|
||||
|
||||
Wiring is very straight forward, if you used a sierra body loom then it should be more or less plug and play.
You will have no issues with imobalisers unless you get a ECU/Loom from a Bugeye Scorpio. There are 2 types of 12V The <91 with solid cam flowers and runs with air flow meters. The >91 with hydraulic folowers and runs a MAP sensor and Lambda. Either engine will work with either management. TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode