|
|
#2
10th July 2014, 01:22 PM
|
|||
|
|||
Try using thin sheet rivnuts in small diameter as they have a thick flange,you could drill the panels the same dia as the flange head and this would possibly be level with the top of the panel depending on thickness.
You might want to place a bit of thin ally behind them in f/glass.
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice. Last edited by flyerncle : 10th July 2014 at 01:28 PM. 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode