Pics didn't come out so well - but I did get some measurements - taken from the Equinox scuttle front edge and the nosecone back edge (i.e. each end of where the bonnet will sit). I'd say that as a minimum you've got 260mm clearance at the scuttle end (above the level of the top chassis rails) and 200mm at the nosecone end. The Equinox nosecone comes back to just about where your left foot ends in the pic earlier on this thread - i.e. just behind where the triangulation is at the front of the chassis.
|
6th January 2015, 10:01 PM
Threaded Mode