Zetec question!!

[Coozer]

Originally Posted by pjb

Hmmmmmm.... ok I take your point, makes good sense. Which bike carbs are people using? (make/model) and how close is the jetting for initial start up?

For the ignition could you use the CVH coil pack and control unit?

Cheers.

I used ZX9R carbs, later ones with TPS, The engine started and ran fine with the standard bike jetting and passed SVA like that. Got mine set up at Bogg Brothers propoerly as the standard jetting gave me nothing above 4K

The BB settings were, mixture screw 4 turns out, needle one groove above middle, mains drilled out to 1.8mm.

And yes i belive the coil pack and unit from a CVH carbed engine can be used.