New Build thread - Haynes Forums

K4KEV New Build thread 23rd June 2010, 01:31 AM

Headshot Good luck :D I have started... 24th June 2010, 07:09 AM

K4KEV re the g/box .....200sx box... 24th June 2010, 09:10 AM

Headshot Want to shift your donor box?... 24th June 2010, 07:56 PM

K4KEV Hi Chris....pm repied to 25th June 2010, 10:31 AM

mark I know you still need a few... 26th June 2010, 10:03 AM

K4KEV Hi Mark I did give Jap City a... 27th June 2010, 01:00 AM

mark I have sent you a Pm 27th June 2010, 12:43 PM

K4KEV Thanks Mark will defo be... 27th June 2010, 04:00 PM

K4KEV It has taken me a while to... 12th August 2010, 12:40 PM

K4KEV And so the saga begins.....a... 25th August 2010, 12:15 AM

twinturbo Nice Mushrooms TT 25th August 2010, 06:17 AM

spud69 They are very nice musshys,... 25th August 2010, 08:57 AM

HandyAndy nice work Kev :cool: your... 25th August 2010, 10:12 AM

K4KEV Ta for the compliments... 25th August 2010, 09:29 PM

Deanno I like the idea you have done... 25th August 2010, 09:33 PM

HandyAndy Nice work Kev, looks like you... 25th August 2010, 09:43 PM

alga Yeah, yeah, most chassis... 25th August 2010, 11:01 PM

K4KEV After trying to get some... 27th August 2010, 10:27 AM

spud69 Well done Kevin, looks like... 27th August 2010, 10:51 AM

K4KEV course we're all tight gits... 27th August 2010, 12:49 PM

K4KEV the overwhelming urge to... 30th August 2010, 11:58 PM

AshG Looks like you need to up the... 31st August 2010, 10:56 PM

twinturbo always nice to see a chassis... 31st August 2010, 11:13 PM

K4KEV Yeah I know Ash....had it... 1st September 2010, 09:35 AM

K4KEV Another few rails added... 5th September 2010, 12:25 PM

K4KEV few more bit added......those... 6th September 2010, 01:07 PM

rpjg1975 Making progress there... I... 6th September 2010, 06:42 PM

K4KEV Okay.....lets play spot the... 6th September 2010, 10:54 PM

HandyAndy I,ve just got my laptop back... 7th September 2010, 08:56 PM

K4KEV Well done bud....I thought if... 7th September 2010, 10:42 PM

HandyAndy Kev... A little tip....(... 7th September 2010, 11:01 PM

K4KEV Update Cheers for the tip... 13th September 2010, 11:13 PM

HandyAndy Nice work Kev :cool: Very... 13th September 2010, 11:19 PM

K4KEV I am so tempted Andy ...I... 13th September 2010, 11:55 PM

HandyAndy The air steering wheel just... 14th September 2010, 12:06 AM

locostkiwi chassis is looking real good... 14th September 2010, 09:28 AM

K4KEV G'day Tony.....my mig is a... 14th September 2010, 10:12 AM

Bonzo Ohhhh ..... Red Anodised... 14th September 2010, 01:28 PM

HandyAndy Told ya :D :D If its red,... 14th September 2010, 06:47 PM

K4KEV OK Ronnie.......have the... 17th September 2010, 01:50 AM

spud69 Looks really good Kevin, for... 17th September 2010, 08:04 AM

Bonzo Pure Roadster porn 17th September 2010, 09:50 AM

K4KEV thanks for the kind comments... 17th September 2010, 02:21 PM

locostkiwi hey K4kev those mushies look... 17th September 2010, 09:11 PM

K4KEV No problem Tony ...sent you a... 17th September 2010, 11:36 PM

Bonzo PM sent to you Kev :) 18th September 2010, 07:12 PM

K4KEV Wupeeeeee....got me stuff... 27th October 2010, 02:08 PM

mark Looks more like 205.62mm to... 27th October 2010, 05:50 PM

K4KEV Gonna buy you a dicky comb:D... 27th October 2010, 06:13 PM

K4KEV Well....been away from the... 29th January 2011, 11:08 PM

Bonzo Coming on nicely Kev 30th January 2011, 10:03 AM

K4KEV Cheers Ronnie....did consider... 30th January 2011, 10:39 AM

K4KEV Bin a while now since my last... 11th March 2011, 08:45 PM

HandyAndy WOW Kev......that looks... 11th March 2011, 08:59 PM

gingea1pom They look fantastic, never... 11th March 2011, 09:11 PM

Bonzo Awesome Kev 12th March 2011, 08:33 AM

K4KEV Ta for the nice comments... 13th March 2011, 08:52 PM

K4KEV Had a busy and pleasant day... 14th March 2011, 09:02 PM

Eternal Holy!.......... Sooooo when... 14th March 2011, 09:07 PM

K4KEV Eternal.....seriously, you... 14th March 2011, 11:22 PM

Eternal haha yeah im sticking to the... 14th March 2011, 11:39 PM

bertie_bas205 I was going to buy a... 15th March 2011, 03:58 PM

Bonzo Super cool 15th March 2011, 09:19 PM

JakeH those look so damn cool! me... 15th March 2011, 11:16 PM

Eternal was thinking today of doing... 15th March 2011, 11:21 PM

K4KEV After trolling the Bay for... 1st April 2011, 03:18 PM

CTWV50 Inspirational thread! Like it... 1st April 2011, 04:31 PM

K4KEV Cheers Chris....I'll bet your... 1st April 2011, 07:39 PM

CTWV50 Yes indeed, I have a lot to... 2nd April 2011, 08:33 AM

K4KEV rightyo...back to progress on... 2nd April 2011, 11:20 AM

Bonzo Great stuff Kev 2nd April 2011, 02:11 PM

K4KEV beauty of it is Ronnie... 2nd April 2011, 02:25 PM

K4KEV Update on my wishbone... 7th April 2011, 08:40 PM

Bonzo Great stuff 7th April 2011, 09:54 PM

K4KEV Have only just noticed the... 8th April 2011, 11:09 AM

deezee How did you manage to get the... 8th April 2011, 11:23 AM

K4KEV hi dz, they were 3ge plates... 8th April 2011, 11:38 AM

K4KEV Yo peeps....just a wee... 19th April 2011, 01:25 PM

Eternal Those are stunning! Amazing... 19th April 2011, 02:26 PM

K4KEV Not quite:( ......however I... 19th April 2011, 03:02 PM

Eternal Cool i know the ones.... 19th April 2011, 03:17 PM

K4KEV Reached an important... 10th May 2011, 01:45 PM

K4KEV Been a bit of a go slow... 15th July 2011, 02:16 AM

K4KEV (This hub refurb starts on... 15th July 2011, 02:34 AM

K4KEV (This hub refurb starts on... 15th July 2011, 02:54 AM

Bonzo Great stuff 15th July 2011, 08:41 PM

K4KEV Thanks for the compliment... 17th July 2011, 03:21 PM

robo superb 17th July 2011, 04:33 PM

Bonzo What can I say 17th July 2011, 04:59 PM

K4KEV [QUOTE=Bonzo;61317] Just had... 17th July 2011, 11:59 PM

Bonzo [QUOTE=K4KEV;61356] Not... 19th July 2011, 08:33 PM

K4KEV I'm using a 25 amp boost... 20th July 2011, 01:06 AM

Ricky New Build thread 20th July 2011, 09:15 AM

K4KEV Hi Ricky....all details on... 20th July 2011, 10:25 AM

Ricky New Build thread 20th July 2011, 12:08 PM

Ricky New Build thread 20th July 2011, 12:17 PM

K4KEV Hi Rick....Anodising is a lot... 20th July 2011, 01:17 PM

Ricky New Build thread 20th July 2011, 05:06 PM

K4KEV fancied doing something... 27th July 2011, 01:16 PM

d4mo Would the extra weight of the... 27th July 2011, 01:46 PM

deezee I know people don't always... 27th July 2011, 02:10 PM

K4KEV well the way I look at it... 27th July 2011, 03:08 PM

K4KEV Managed to construct a... 3rd August 2011, 02:19 PM

ozzy1 Looks good,cant wait to see... 3rd August 2011, 02:46 PM

K4KEV Hi oz...putting a swirlpot... 3rd August 2011, 03:09 PM

spud69 That's looking real good... 3rd August 2011, 03:30 PM

K4KEV yep..you know your'e always... 3rd August 2011, 03:55 PM

sven8t4 Wow Kev that looks... 3rd August 2011, 04:32 PM

K4KEV Hi Sven after a rehash of... 3rd August 2011, 04:56 PM

More replies below current depth...

robo Did you do much more on the... 28th July 2012, 07:14 PM

K4KEV not yet Bob....want to sort... 28th July 2012, 09:05 PM

K4KEV crikey ...long time since I... 26th September 2012, 10:19 AM

K4KEV been busy prepping and... 1st October 2012, 12:37 AM

K4KEV managed to get the offside... 2nd October 2012, 10:18 PM

spud69 Looks nice Kevin but you may... 3rd October 2012, 07:37 AM

robo Would the lower outer chassis... 3rd October 2012, 08:02 AM

spud69 No there is enough give for... 3rd October 2012, 08:08 AM

K4KEV Rob....yep, am going to put a... 3rd October 2012, 12:44 PM

robo I like the idea of the 3mm... 3rd October 2012, 11:05 PM

Davidbolam I think I used a 3mm floor... 4th October 2012, 01:23 PM

spud69 Hi david, I've got no... 4th October 2012, 01:28 PM

K4KEV hi Dave ....you could always... 4th October 2012, 01:52 PM

K4KEV Bob....the 3mm stuff was left... 4th October 2012, 09:24 PM

spud69 Don't forget Kevin that there... 4th October 2012, 09:40 PM

mgglep I did exactly the same thing... 4th October 2012, 10:37 PM

K4KEV Queer thing is Andy my... 5th October 2012, 01:58 PM

K4KEV Started on pipework today and... 6th October 2012, 12:27 AM

Oscar This is what I love about... 6th October 2012, 08:46 PM

K4KEV good progress today....have... 7th October 2012, 01:47 AM

robo I reckon Chapman would have... 7th October 2012, 08:27 AM

voucht Very neat installation Kev,... 7th October 2012, 09:40 AM

The V8 Files Liking the progress Kev 7th October 2012, 10:37 AM

K4KEV Mmmm....might try to swap... 7th October 2012, 04:37 PM

K4KEV I have had a little rethink... 9th October 2012, 11:26 AM

K4KEV Got the chassis right way up... 10th October 2012, 11:15 AM

spud69 That looks good Kevin, very... 10th October 2012, 01:30 PM

alga Nice touch indeed! Did you... 10th October 2012, 01:49 PM

K4KEV Andy....that came from Ash... 10th October 2012, 02:34 PM

K4KEV not much done today....only... 11th October 2012, 11:54 PM

HandyAndy still catching up with lots... 13th October 2012, 10:26 AM

twinturbo Hope your going to be more... 13th October 2012, 10:40 AM

voucht The gearbox looks very nice... 13th October 2012, 08:41 PM

twinturbo theres a thinning guide on... 13th October 2012, 09:07 PM

K4KEV yep I used a sand blaster... 13th October 2012, 10:43 PM

robo Another decent paint for... 14th October 2012, 12:37 PM

K4KEV Dug my half built tank out... 18th October 2012, 06:53 PM

K4KEV bit more of the tank done... 18th October 2012, 11:33 PM

K4KEV Moved on to the sender/pump... 20th October 2012, 10:35 AM

K4KEV Have decided to mount the... 20th October 2012, 10:10 PM

Old Jag Guy Good evening! Well, if I can... 21st October 2012, 01:19 AM

K4KEV Hi Don...capacity is close to... 21st October 2012, 11:57 AM

K4KEV Well I managed to complete my... 22nd October 2012, 01:42 AM

robo Kin brilliant.:) 12 gallons... 22nd October 2012, 07:49 AM

K4KEV Bob....It does have a just... 22nd October 2012, 11:28 AM

K4KEV After testing the tank with... 24th October 2012, 12:15 PM

K4KEV got my prop this afternoon,... 24th October 2012, 05:30 PM

robo On the tanks we knock up for... 25th October 2012, 09:19 PM

K4KEV Yeah those had crossed my... 26th October 2012, 01:01 AM

The V8 Files Liking your progress Kev,... 26th October 2012, 01:31 PM

K4KEV After a few thoughts on the... 2nd November 2012, 12:21 PM

robo All the graft you put in on... 2nd November 2012, 05:14 PM

K4KEV worst is yet to come Bob... 7th November 2012, 12:00 PM

K4KEV Got this back the other day... 7th November 2012, 12:35 PM

robo If I was you Kev I would... 7th November 2012, 06:36 PM

K4KEV I would do Bob, buuuuuut the... 7th November 2012, 07:14 PM

K4KEV Having got all the... 7th November 2012, 11:46 PM

K4KEV got a bit more done so... 8th November 2012, 09:54 AM

motomaniac cant you use a drill with a... 8th November 2012, 11:54 AM

K4KEV I have some real evil rotary... 8th November 2012, 04:27 PM

flyerncle Daft thought Kev,your marks... 8th November 2012, 06:34 PM

K4KEV aaahhhhhhaaaaa but I will be... 8th November 2012, 09:07 PM

flyerncle No comment :eek:. Pm 8th November 2012, 09:10 PM

The V8 Files Kev, just imagine you could... 8th November 2012, 09:55 PM

robo Your talking to the forums... 8th November 2012, 10:07 PM

K4KEV Teeth are ok Bob but I had a... 9th November 2012, 11:36 PM

robo If there`s no starter in the... 10th November 2012, 04:58 PM

K4KEV no problem there Bob, that... 10th November 2012, 05:23 PM

robo A man with a grinder kev:) :)... 11th November 2012, 06:04 PM

K4KEV hey hey... a gadgy after my... 11th November 2012, 07:53 PM

K4KEV got my sump finished ....just... 12th November 2012, 09:28 PM

alga Did you check it for... 12th November 2012, 09:49 PM

K4KEV checked for pinholes and... 13th November 2012, 09:43 AM

robo That must have put back what... 15th November 2012, 10:14 AM

K4KEV About right Bob ...I think it... 15th November 2012, 10:55 AM

AshG kev little note. weld a... 15th November 2012, 07:10 PM

K4KEV Thanks for the heads up on... 16th November 2012, 09:21 AM

robo bump:( bump bob 16th November 2012, 09:48 AM

K4KEV WTF's been going on:eek: that... 16th November 2012, 05:02 PM

K4KEV finally finally finally got... 19th November 2012, 05:38 PM

robo [QUOTE=K4KEV;81351]finally... 19th November 2012, 05:52 PM

K4KEV First time I have seen one... 23rd November 2012, 04:52 PM

The V8 Files Share some pics Kev pls :) 23rd November 2012, 10:31 PM

K4KEV here you go DoS.....you'd... 25th November 2012, 05:27 PM

The V8 Files [QUOTE=K4KEV;82455]here you... 25th November 2012, 06:16 PM

K4KEV Got me bonny blue paint... 28th November 2012, 09:21 PM

The V8 Files Eww, I'm sure it'l be shiny... 28th November 2012, 11:10 PM

K4KEV not yet shiny DoS but a... 1st December 2012, 02:23 PM

The V8 Files Where's the 'Likey' button... 1st December 2012, 04:22 PM

twinturbo Is that the Lydl spray... 1st December 2012, 05:42 PM

K4KEV nah a lot cheaper than that... 2nd December 2012, 10:17 AM

K4KEV Got the old nitromors to work... 3rd December 2012, 01:43 AM

K4KEV bluddy pleased my thread is... 5th December 2012, 03:59 PM

K4KEV you can have a laff at this... 8th December 2012, 09:00 PM

K4KEV Nice one guys......I had... 10th December 2012, 01:56 PM

K4KEV Got my freshly skimmed... 12th December 2012, 11:20 PM

ayjay Those are works of art;) Its... 12th December 2012, 11:36 PM

vmax1974 kev that is coming together... 13th December 2012, 11:36 AM

K4KEV cheers guys....that spurs me... 14th December 2012, 02:00 AM

flyerncle What a bloke,even the oil... 14th December 2012, 06:52 PM

K4KEV Ha Ha Paul....cheers... 18th December 2012, 01:30 AM

robo Nice mod that kev. Thats the... 20th December 2012, 10:03 AM

K4KEV yep ....it had me thinking a... 20th December 2012, 09:28 PM

robo The attention to detail is... 20th December 2012, 09:49 PM

K4KEV cheers Bob...got my plug... 23rd December 2012, 11:36 PM

K4KEV not a great deal done the... 25th December 2012, 09:27 PM

K4KEV cracked on and got a bit more... 1st January 2013, 01:09 PM

Tatey Kev that engine really is a... 1st January 2013, 02:00 PM

twinturbo yep that's a sweeeeeeeeeeet... 1st January 2013, 03:32 PM

robo By the time your finished kev... 1st January 2013, 03:40 PM

K4KEV dirty Simon! DIRTY:eek: when... 2nd January 2013, 10:28 AM

twinturbo is the eccs badge not being... 2nd January 2013, 11:02 AM

K4KEV I knoooow ...how the hell did... 2nd January 2013, 11:10 AM

robo [QUOTE=K4KEV;87543]"Your... 2nd January 2013, 08:23 PM

The V8 Files Its been a while since I... 6th January 2013, 10:01 PM

flyerncle Kev's build and dirty in the... 7th January 2013, 08:38 PM

vmax1974 kev your build is setting the... 8th January 2013, 01:23 PM

K4KEV Thanks for all the good... 13th January 2013, 01:10 PM

K4KEV I had a reel of black plastic... 14th January 2013, 04:32 PM

twinturbo the over braid works well..... 14th January 2013, 07:30 PM

flyerncle Does look rather good !;) 14th January 2013, 08:11 PM

Eternal Ohh did not realise that you... 14th January 2013, 08:13 PM

K4KEV will be running a stock ECU... 15th January 2013, 07:59 AM

AshG looking good kev, have to... 15th January 2013, 09:23 PM

K4KEV yep ,that is true Ash, but I... 17th January 2013, 11:32 AM

robo I like the overbraid kev.... 17th January 2013, 08:19 PM

K4KEV yep....seen those Rob, but I... 18th January 2013, 11:11 AM

K4KEV I have been busy with a few... 20th January 2013, 12:42 PM

Eternal WOW that engine looks mint!... 20th January 2013, 12:57 PM

K4KEV Hi Alex.....turbo paint came... 20th January 2013, 03:35 PM

flyerncle Far too pretty too put on the... 20th January 2013, 06:41 PM

sparkybagnall That engine is a work of art... 20th January 2013, 06:58 PM

Oscar Phwoar! Now theres a couple... 20th January 2013, 07:43 PM

Eternal Great thanks for the info!... 20th January 2013, 07:55 PM

voucht That's such an amazing job... 21st January 2013, 05:16 AM

Johno Very nice work on that engine... 24th January 2013, 07:48 PM

robo All of that and a bit... 26th January 2013, 01:26 PM

K4KEV Again....thanks... 4th February 2013, 12:52 AM

K4KEV engine came back out for me... 5th February 2013, 01:16 AM

K4KEV BOY am I gonna have a... 5th February 2013, 10:48 PM

Tatey Could you put the passenger... 6th February 2013, 08:01 AM

flyerncle Fabricate another flange and... 6th February 2013, 06:51 PM

K4KEV just one wee problem.....it... 6th February 2013, 08:56 PM

Stot How about cutting the outlet... 7th February 2013, 11:57 AM

K4KEV Won't work either Stot, as... 7th February 2013, 04:30 PM

robo Get onto this crowd kev they... 7th February 2013, 06:28 PM

K4KEV Those are very nice bends Bob... 10th February 2013, 10:50 PM

Eternal I have just cut my thermo... 10th February 2013, 11:08 PM

Eternal Oh and re the turbo it might... 10th February 2013, 11:13 PM

K4KEV Hi Alex .....had considered... 13th February 2013, 01:35 PM

K4KEV couple of shots of in situ... 13th February 2013, 01:40 PM

Eternal Wow that is a bit tight! What... 13th February 2013, 04:59 PM

K4KEV yeah go ahead Alex ...break... 13th February 2013, 09:12 PM

robo Couple of things kev, First... 14th February 2013, 08:37 AM

flyerncle There is no stopping the Man... 14th February 2013, 08:20 PM

K4KEV Me thinks I will cross that... 23rd February 2013, 08:51 PM

K4KEV Exhaust is now coming... 25th February 2013, 08:53 PM

K4KEV Should see me finished the... 1st March 2013, 01:19 PM

flyerncle Nice one as usual Kev,not a... 1st March 2013, 05:31 PM

will_08 Jesus Kev You don't half... 1st March 2013, 05:42 PM

K4KEV yep Paul ....it is a case of... 2nd March 2013, 09:32 AM

K4KEV After much trolling the... 2nd March 2013, 09:16 PM

K4KEV http://i465.photobucket.com/al... 2nd March 2013, 09:17 PM

twinturbo Awesome work, glad you have... 3rd March 2013, 08:31 AM

flyerncle Kev if you need stuff in... 3rd March 2013, 06:11 PM

Johno Awesome work on the exhaust... 3rd March 2013, 07:49 PM

K4KEV cheers guys and thanks Paul... 5th March 2013, 07:55 PM

Davidbolam Kev, your build looks... 5th March 2013, 08:44 PM

K4KEV After something Bob said... 6th March 2013, 08:57 PM

twinturbo I bet you go skip diving too... 7th March 2013, 12:50 PM

robo There is a womble in all good... 9th March 2013, 05:20 PM

K4KEV absolutely Bob and yes TT I... 11th March 2013, 06:30 PM

K4KEV Starting to move towards... 12th March 2013, 08:01 PM

Davidbolam Kev, The exhaust pipe I... 14th March 2013, 02:36 PM

CTWV50 I'd use plumbers lead solder.... 14th March 2013, 03:03 PM

K4KEV Hi David....I would be very... 14th March 2013, 03:26 PM

K4KEV Nearly forgot that I will... 18th March 2013, 01:49 AM

flyerncle It is suprising where the... 18th March 2013, 04:46 PM

thailoz Hi Kev just read your build... 19th March 2013, 05:00 AM

K4KEV Thanks for that heads up Paul... 19th March 2013, 11:39 PM

flyerncle Leave the DLC in if you can... 20th March 2013, 12:22 PM

K4KEV fraid not Paul ....they do... 20th March 2013, 03:31 PM

flyerncle Just a thought,:eek: 20th March 2013, 04:51 PM

K4KEV Had to neglect the build for... 24th March 2013, 10:59 PM

thailoz Well done that man !! I bet... 25th March 2013, 09:07 AM

K4KEV Well I have 2 attempts at a... 28th March 2013, 07:43 PM

robj looking good mate you'll be... 28th March 2013, 09:05 PM

thailoz nice one well done 28th March 2013, 09:20 PM

robo Thats a major step forward... 28th March 2013, 11:39 PM

twinturbo Super.... it's a massive... 29th March 2013, 07:50 AM

The V8 Files Awesome :D :D :D 29th March 2013, 09:42 AM

flyerncle Well done Kev.:cool: 29th March 2013, 06:32 PM

Old Jag Guy Looks Great, Kev !! Nice... 30th March 2013, 10:20 PM

K4KEV cheers guys, you don,t half... 3rd April 2013, 03:31 PM

alga Wow, what a sweet sound! 3rd April 2013, 08:19 PM

CTWV50 Sounds great now kev, engine... 3rd April 2013, 11:31 PM

thailoz To me that is how a roadster... 4th April 2013, 12:30 AM

jason Excellent, sounds really good. 4th April 2013, 08:00 AM

skov That's looking and sounding... 4th April 2013, 07:54 PM

Johno Good job Kev.:) :) :) Like... 4th April 2013, 10:11 PM

AshG well done kev. you did well... 5th April 2013, 09:29 PM

voucht I'm amazed by rapidity you... 6th April 2013, 10:18 AM

The V8 Files Good job Kev! Sounding good... 6th April 2013, 11:06 AM

K4KEV final mounting of the exhaust... 13th April 2013, 02:41 PM

Johno Well that's looking damn good... 13th April 2013, 07:37 PM

K4KEV Your'e not half kidding... 14th April 2013, 12:06 PM

K4KEV footy was BRILL....while... 15th April 2013, 02:00 AM

K4KEV been quiet for a few days ,... 25th April 2013, 01:56 PM

K4KEV Got some paint on my pedal... 26th April 2013, 08:04 PM

K4KEV Starting to put these... 27th April 2013, 01:18 PM

K4KEV decided to re-hash my clutch... 29th April 2013, 02:45 PM

K4KEV I have decided to change my... 29th April 2013, 06:01 PM

SeriesLandy Looking great as normal Kev... 29th April 2013, 10:41 PM

K4KEV they are all just normal... 30th April 2013, 10:00 AM

K4KEV Got my accelerator fitted and... 30th April 2013, 11:43 AM

K4KEV pedal box now in and bolted... 1st May 2013, 11:12 AM

thailoz Looking nice kev Just one... 1st May 2013, 03:13 PM

K4KEV ha ha Lawrence ...gud... 1st May 2013, 06:13 PM

flyerncle Shame on you Lawrence,the man... 1st May 2013, 07:38 PM

K4KEV a naw Paul.... we dis e think... 1st May 2013, 09:09 PM

Johno Very nice indeed...:D Is... 1st May 2013, 09:20 PM

thailoz ok head hung in shame lol :o 1st May 2013, 11:53 PM

flyerncle you dont know him lawrence... 2nd May 2013, 07:07 PM

K4KEV Are you saying I am a tad... 4th May 2013, 09:55 AM

thailoz Thanks Kev I can sleep now :D... 5th May 2013, 12:23 AM

flyerncle How much is a tad ?:p Eye... 5th May 2013, 06:33 PM

K4KEV cheers Paul...anyways....time... 6th May 2013, 04:01 PM

alga I would use rivnuts for the... 6th May 2013, 09:17 PM

K4KEV I would agree with you... 7th May 2013, 09:20 AM

deezee My nose cone is held on with... 7th May 2013, 12:02 PM

K4KEV I know what you are saying DZ... 7th May 2013, 04:52 PM

K4KEV Almost got my rear tub ready... 7th May 2013, 05:43 PM

Johno Blumin heck, that definitely... 7th May 2013, 08:21 PM

K4KEV Well at the minute Johno I am... 8th May 2013, 10:10 AM

twinturbo Do the FG side panels fit... 8th May 2013, 12:30 PM

K4KEV Yeah TT I have found out the... 15th May 2013, 09:32 AM

SeriesLandy What double sides tape have... 15th May 2013, 12:01 PM

twinturbo Yeah I had to cut the lower... 15th May 2013, 12:12 PM

K4KEV Steve.....it was just regular... 16th May 2013, 11:13 AM

flyerncle Looking good Kev,what are the... 16th May 2013, 07:32 PM

K4KEV just foldable el cheapo's... 16th May 2013, 08:44 PM

flyerncle Cheers Kev will keep a look... 17th May 2013, 07:45 PM

K4KEV offered up the rear tub last... 20th May 2013, 10:58 AM

K4KEV had to change my front brake... 20th May 2013, 02:33 PM

K4KEV Trial fit of rear... 21st May 2013, 09:21 AM

SeriesLandy Yeah putting the rear arches... 21st May 2013, 10:48 AM

flyerncle Not long now.......;) 21st May 2013, 04:23 PM

robo All the attention to detail... 21st May 2013, 05:07 PM

K4KEV cheers guys but keep a had of... 22nd May 2013, 09:30 AM

K4KEV Having never liked the front... 22nd May 2013, 06:03 PM

flyerncle Point of interest,5mm flat... 22nd May 2013, 06:59 PM

ayjay I am going to remake mine at... 22nd May 2013, 10:17 PM

K4KEV Well those bits I am using... 25th May 2013, 01:50 PM

ayjay Welding the stays in situ is... 25th May 2013, 02:35 PM

K4KEV Yeah.... I thought they would... 25th May 2013, 09:02 PM

skov They look nice and sturdy! I... 25th May 2013, 09:09 PM

robo +1 on this. Nothing worse... 26th May 2013, 09:45 AM

K4KEV That a good suggestion Bob... 26th May 2013, 12:02 PM

SeriesLandy The wingstays look great kev,... 26th May 2013, 01:44 PM

K4KEV I will probably just put a... 26th May 2013, 04:15 PM

K4KEV nearly ready to clag on the... 26th May 2013, 06:47 PM

robo As usual kev SUPERB :cool: .... 26th May 2013, 08:40 PM

K4KEV Got to say Bob ....they are... 27th May 2013, 11:19 AM

Tatey Kev in the future when you... 27th May 2013, 12:58 PM

Dualist Looks a bit close to the side... 27th May 2013, 05:42 PM

K4KEV Simon Simon Simon!!!!!!!!!!!... 27th May 2013, 06:31 PM

K4KEV Got the stays sikaflexed to... 28th May 2013, 11:18 AM

K4KEV undersealed and put to one... 29th May 2013, 11:09 AM

ayjay I had something like that... 29th May 2013, 04:03 PM

K4KEV AJ.... wire will be covered... 30th May 2013, 12:05 PM

K4KEV Hi Peeps ....had a few days... 5th June 2013, 09:58 PM

robo Thats one serious quantity of... 6th June 2013, 10:43 PM

K4KEV Thats nowt Bob, I nearly... 7th June 2013, 11:14 AM

twinturbo Not done HomeBrew in 10... 7th June 2013, 12:39 PM

jps For sure the various pics of... 7th June 2013, 01:27 PM

K4KEV sorry guys got me numerals... 7th June 2013, 08:11 PM

K4KEV been doing a bit on the trans... 11th June 2013, 11:06 AM

Tatey Kev, don't forget to drill a... 11th June 2013, 11:41 AM

twinturbo F.........k TT 11th June 2013, 12:43 PM

Tatey TT the easiest option for you... 11th June 2013, 01:08 PM

K4KEV Dont worry guys I did not... 11th June 2013, 02:41 PM

K4KEV Nearly finished the trans... 14th June 2013, 11:03 AM

ayjay I reckon its a damper:cool: 14th June 2013, 12:17 PM

twinturbo or just a Mass to give the... 14th June 2013, 12:38 PM

K4KEV Right hand trans tunnel now... 18th June 2013, 01:02 PM

K4KEV Decided I needed a change... 19th June 2013, 06:38 PM

flyerncle That's what I call a shiny... 20th June 2013, 10:20 AM

K4KEV nothing like playing with a... 20th June 2013, 01:37 PM

K4KEV chucked a wheel on with nice... 21st June 2013, 12:04 PM

voucht Yes, but I have been told... 21st June 2013, 12:10 PM

flyerncle Red knob and nuts leads to... 21st June 2013, 12:46 PM

K4KEV Ha ha ha.... postie just been... 22nd June 2013, 11:17 AM

AshG have you thought about how... 22nd June 2013, 04:41 PM

Talonmotorsport I'm guessing that the counter... 22nd June 2013, 05:45 PM

K4KEV yep... on the button Phil,... 22nd June 2013, 10:01 PM

K4KEV Decided to refit exhaust... 23rd June 2013, 03:53 PM

K4KEV next big job is looming and... 23rd June 2013, 07:34 PM

K4KEV also got my hands on some... 23rd June 2013, 10:49 PM

K4KEV Been busy with the jigsaw and... 24th June 2013, 12:26 PM

Johno Hi Kev, Sometimes the... 24th June 2013, 09:08 PM

K4KEV Yup.... I know John its a... 25th June 2013, 01:25 AM

K4KEV final shape now complete....I... 25th June 2013, 10:31 AM

twinturbo Are the rear lamps... 25th June 2013, 12:14 PM

K4KEV Yup they sure are ....only... 25th June 2013, 03:40 PM

K4KEV I had no idea how messy... 25th June 2013, 09:24 PM

K4KEV Time to make a start on... 25th June 2013, 11:19 PM

K4KEV Not much done today due to... 26th June 2013, 10:08 PM

K4KEV Its funny how you go through... 27th June 2013, 05:29 PM

K4KEV After re-appraising my... 30th June 2013, 10:36 AM

K4KEV Got them all soldered up then... 30th June 2013, 10:16 PM

thailoz nice work Kev a great idea... 1st July 2013, 12:07 AM

twinturbo Gettign there, :) I am just... 1st July 2013, 09:06 AM

K4KEV Hope so Lawrence.. hope... 1st July 2013, 02:52 PM

K4KEV Just finished the exhaust... 1st July 2013, 04:04 PM

K4KEV now polished up and... 1st July 2013, 07:28 PM

K4KEV Finally exhaust system... 2nd July 2013, 09:30 AM

SeriesLandy Looking very smart as usual... 2nd July 2013, 10:27 PM

K4KEV Cheers Steve As most of you... 3rd July 2013, 01:40 AM

K4KEV Here is a little tip I picked... 4th July 2013, 04:18 PM

K4KEV Already used that string... 13th July 2013, 12:36 AM

K4KEV Am pleased to report that... 15th July 2013, 10:07 PM

K4KEV Got me a nice Apexi Power... 19th July 2013, 11:24 AM

K4KEV Nearly forgot about this... 20th July 2013, 10:00 AM

Ricky mushrooms 20th July 2013, 05:42 PM

Johno Builds looking awesome... 20th July 2013, 07:26 PM

K4KEV Ricky....Could have done that... 21st July 2013, 01:39 PM

K4KEV Well I will need to get my... 25th July 2013, 05:14 PM

jason 82 Well done Kev ! Good luck. 25th July 2013, 07:36 PM

Oscar Thats a very nice little bit... 25th July 2013, 09:41 PM

K4KEV It does Oscar....I have... 26th July 2013, 09:49 AM

Davidbolam Have you decided which. Test... 26th July 2013, 11:25 AM

K4KEV I opted for Newcastle, even... 26th July 2013, 06:22 PM

Davidbolam I'm only 2 mins from the test... 26th July 2013, 07:56 PM

K4KEV Thats brill Dave ....I will... 27th July 2013, 03:45 PM

K4KEV Here are those photos I... 31st July 2013, 12:57 AM

K4KEV Now I have to do the... 31st July 2013, 09:21 PM

ayjay Hi Kev Just noticed your post... 31st July 2013, 09:50 PM

K4KEV Funny you should mention that... 1st August 2013, 09:38 AM

K4KEV water pump off now... 1st August 2013, 04:05 PM

vmax1974 Its made a bit of a mess of... 1st August 2013, 05:23 PM

K4KEV There is one thing I have... 2nd August 2013, 10:00 AM

K4KEV Pleased to say the last part... 3rd August 2013, 05:29 PM

K4KEV Now to start sorting out the... 4th August 2013, 11:07 AM

K4KEV BIG job done yesterday... 5th August 2013, 10:27 AM

K4KEV Thought I would use today to... 5th August 2013, 08:48 PM

K4KEV few things done... 6th August 2013, 09:34 PM

twinturbo That's a lot of fixings :D... 6th August 2013, 09:49 PM

K4KEV re the csk bolts.....it did... 7th August 2013, 08:17 AM

K4KEV Decided to use the sierra... 8th August 2013, 08:47 AM

alga Looks like that dashboard is... 9th August 2013, 01:16 AM

K4KEV I don't like to think about... 9th August 2013, 05:42 PM

flyerncle Its taking shape Kev,is that... 10th August 2013, 11:44 AM

K4KEV Yep it is the ballast... 10th August 2013, 06:04 PM

flyerncle Was not sure but remember... 11th August 2013, 03:41 PM

K4KEV Have been making up the... 14th August 2013, 07:28 PM

K4KEV Well after considering the... 15th August 2013, 11:19 AM

rpjg1975 Extra bonus is you get to... 15th August 2013, 12:10 PM

K4KEV Never thought of it that way... 15th August 2013, 08:29 PM

rpjg1975 More productive day than me... 15th August 2013, 10:08 PM

twinturbo I finished a rack unit to go... 15th August 2013, 10:38 PM

K4KEV Got me mirrors fitted today... 17th August 2013, 08:53 PM

alga Just a small note about... 18th August 2013, 12:07 PM

K4KEV Albert....the main reason for... 19th August 2013, 10:05 AM

TheArf Don't think they will be... 19th August 2013, 12:23 PM

dubzter Hi there, first time poster,... 20th August 2013, 02:17 PM

K4KEV Cheers for that Alan ...yep... 20th August 2013, 05:49 PM

dubzter I'm in the process of... 20th August 2013, 07:20 PM

SeriesLandy Only 3 years kev, I looked at... 20th August 2013, 10:05 PM

K4KEV Well get your bluddy finger... 21st August 2013, 06:46 PM

flyerncle PMT ?, sorry mis-read should... 22nd August 2013, 12:59 PM

K4KEV Yeah I know Paul... how... 22nd August 2013, 11:44 PM

K4KEV Have had a couple of days off... 27th August 2013, 01:53 AM

locost-turbo is it just a wieght to make... 27th August 2013, 07:00 AM

K4KEV lol ...you are a bit late... 27th August 2013, 10:38 AM

twinturbo Do the lights fall within... 27th August 2013, 12:34 PM

K4KEV You don't wanna know how many... 27th August 2013, 03:01 PM

K4KEV nearly forgot the grill so... 27th August 2013, 04:55 PM

K4KEV tidied up the rear light... 28th August 2013, 10:02 AM

K4KEV Good progress yesterday... 29th August 2013, 11:01 AM

K4KEV http://i465.photobucket.com/al... 29th August 2013, 11:04 AM

flyerncle Pitot on a homebuild (nearly... 29th August 2013, 05:06 PM

K4KEV Well it is gonna fly... 30th August 2013, 09:58 AM

flyerncle Worth the effort though,looks... 30th August 2013, 01:10 PM

SeriesLandy Tell me about the aero... 30th August 2013, 04:43 PM

K4KEV couple of brackets marked out... 5th September 2013, 03:24 AM

K4KEV http://i465.photobucket.com/al... 5th September 2013, 03:27 AM

TheArf Fair do's mate the bezels... 5th September 2013, 08:38 AM

flyerncle He's Good ! :p 5th September 2013, 03:20 PM

TheArf Setting the bench mark... 5th September 2013, 04:42 PM

K4KEV Thank you guys....its great... 7th September 2013, 11:41 AM

SeriesLandy Looking great kev, it feels... 7th September 2013, 01:51 PM

TheArf Don't know about tight, I... 7th September 2013, 03:00 PM

K4KEV Huge huge milestone .....its... 7th September 2013, 07:57 PM

CTWV50 Well done that man, looks... 7th September 2013, 08:19 PM

Davidbolam That's looking good. Must be... 7th September 2013, 09:28 PM

alga Kev, congrats on the... 8th September 2013, 02:16 AM

Johno Yeah its a lot easier working... 11th September 2013, 03:24 PM

TheArf Cracking achievement bet you... 11th September 2013, 07:33 PM

voucht It is such a long time I've... 15th September 2013, 04:06 PM

AshG come on kev dont keep us... 15th September 2013, 10:15 PM

K4KEV Ta for some very kind... 16th September 2013, 01:20 AM

jason 82 Well done Kevo ! Who's... 16th September 2013, 08:00 AM

TheArf I found a caravan advertised... 16th September 2013, 08:38 AM

K4KEV van chassis and steel were a... 16th September 2013, 09:50 AM

flyerncle I know the guy that owns... 16th September 2013, 10:31 AM

twinturbo I thought the ALCO chassis... 16th September 2013, 12:12 PM

TheArf Mine ain't Arfon 16th September 2013, 12:59 PM

jason 82 Well done Kevo ! 16th September 2013, 02:41 PM

Davidbolam I was going to take mine to... 16th September 2013, 08:14 PM

K4KEV That is very tempting Paul if... 17th September 2013, 12:01 AM

flyerncle Kev,David, I know Storm well... 17th September 2013, 09:55 AM

Davidbolam Do you know stan purdy with... 17th September 2013, 07:36 PM

K4KEV Don't worry about it Dave,... 18th September 2013, 10:43 AM

flyerncle Don't know many from up there... 18th September 2013, 02:06 PM

AshG just remember where ever you... 18th September 2013, 03:00 PM

AshG i live opposite a copper he... 18th September 2013, 03:01 PM

K4KEV Again cheers Paul but I think... 19th September 2013, 12:51 AM

jason 82 Well done Kev, bet it's going... 19th September 2013, 07:15 AM

Talonmotorsport Are those rims on the hubs... 19th September 2013, 08:07 AM

K4KEV Will be getting a hammerite... 19th September 2013, 10:03 AM

TheArf Looking good that may I can... 19th September 2013, 10:58 AM

vmax1974 Looking good kev look forward... 19th September 2013, 12:16 PM

twinturbo you need some rear drop legs... 19th September 2013, 12:30 PM

flyerncle Shoot oot loud if ya stuck ;) 19th September 2013, 01:41 PM

K4KEV FINISHED WU HOO FINISHED ... 19th September 2013, 08:12 PM

K4KEV http://i465.photobucket.com/al... 19th September 2013, 08:13 PM

ayjay Looks awesome-well done;) 19th September 2013, 09:05 PM

The V8 Files Congrats there Kev, looking... 19th September 2013, 09:59 PM

jason 82 Well done Kev. Now for build... 19th September 2013, 10:33 PM

jps looks very nice! 19th September 2013, 10:37 PM

TheArf Very nice indeed sir, very... 20th September 2013, 08:41 AM

Stot Its amazing up til now we... 20th September 2013, 09:02 AM

thailoz She looks an absolute treat... 20th September 2013, 09:43 AM

AshG vid vid vid!!! :D 20th September 2013, 09:58 AM

flyerncle The bogs dollocks mate well... 20th September 2013, 10:20 AM

SeriesLandy Well done kev, looking great 20th September 2013, 10:39 AM

Davidbolam Well done kev. Have fun... 20th September 2013, 04:20 PM

K4KEV Hi guys and thanks.....may... 20th September 2013, 07:19 PM

Johno One nice car you got there... 20th September 2013, 08:17 PM

K4KEV Well guys, had my Iva today... 18th October 2013, 07:23 PM

Stot Not too bad Kev. Interesting... 18th October 2013, 08:07 PM

SeriesLandy Unlucky kev but not a bad... 18th October 2013, 08:34 PM

ayjay Well done, nothing serious as... 18th October 2013, 10:00 PM

voucht So sorry to hear the news... 19th October 2013, 08:07 PM

ayjay http://www.antarctica.ac.uk/im... 19th October 2013, 10:15 PM

TheArf No its not that was coedpoeth... 20th October 2013, 10:41 AM

K4KEV cheers for that tip Steve it... 13th November 2013, 12:25 PM

flyerncle This time ;) 13th November 2013, 02:35 PM

voucht In French, we say... 13th November 2013, 04:34 PM

Davidbolam Good luck kev. David 13th November 2013, 06:08 PM

K4KEV It will be effin merder:p :p ... 13th November 2013, 07:13 PM

K4KEV see previous page for a... 13th November 2013, 07:14 PM

rpjg1975 Dont forget nut covers on... 13th November 2013, 07:30 PM

K4KEV they cannot Russ.... as that... 13th November 2013, 09:06 PM

rpjg1975 Thats a bit of a bonus then,... 13th November 2013, 09:09 PM

jason 82 Good luck Kev !:D 13th November 2013, 09:35 PM

twinturbo Bestest of Lukiness... TT 13th November 2013, 10:49 PM

SeriesLandy Good luck for tomorrow and... 13th November 2013, 11:46 PM

vmax1974 Good luck for today kev will... 14th November 2013, 07:21 AM

flyerncle Good luck mate,dont stand in... 14th November 2013, 09:59 AM

flyerncle Might be a good idea when its... 14th November 2013, 12:17 PM

K4KEV YIPYYIYOOOOOOODA....WAHHHHHOOO... 14th November 2013, 04:38 PM

ayjay Brilliant---well done Kev:)... 14th November 2013, 05:23 PM

jason 82 Brilliant ! Well done Kev. :D 14th November 2013, 05:35 PM

vmax1974 great stuff that man well... 14th November 2013, 05:40 PM

Davidbolam Well done kev. If you new... 14th November 2013, 06:23 PM

rpjg1975 Well done kev. See you down... 14th November 2013, 06:33 PM

twinturbo woooop.... That's gr8... 14th November 2013, 07:10 PM

flyerncle Nice one,worth the hassle in... 14th November 2013, 07:23 PM

K4KEV Sure you can Dave (clips) Ok... 14th November 2013, 08:32 PM

voucht Congratulations Kev, I'm so... 14th November 2013, 09:01 PM

alga Congrats, Kev! What can I... 15th November 2013, 12:08 AM

thailoz Well done great looking car 15th November 2013, 09:16 AM

Dualist Congrats Kev, looks and... 15th November 2013, 10:17 AM

SeriesLandy Well done mate, looks great. 15th November 2013, 10:31 AM

rpjg1975 Kev, Are my eyes deceiving... 15th November 2013, 08:22 PM

K4KEV Errr yep Russ ....why should... 15th November 2013, 10:01 PM

Stot Well done Kev. Glad your... 15th November 2013, 10:13 PM

rpjg1975 Just with the discussions all... 15th November 2013, 10:50 PM

ayjay They are fine on the scuttle... 15th November 2013, 11:20 PM

K4KEV by the way Stot.....forgot to... 16th November 2013, 12:04 AM

jason 82 Lol. Kev, you must have the... 16th November 2013, 08:08 AM

Davidbolam Kev, Did you find a local... 16th November 2013, 09:29 AM

flyerncle I cut mine to length and... 16th November 2013, 03:18 PM

davidimurray Congratulations Kev. 16th November 2013, 04:44 PM

flyerncle IVA manual seems to be made... 17th November 2013, 10:30 AM

K4KEV Cheers for all the great... 19th November 2013, 05:24 PM

K4KEV http://i465.photobucket.com/al... 19th November 2013, 07:54 PM

ayjay Thats great . I bought an... 19th November 2013, 10:25 PM

flyerncle When I saw the first pic I... 20th November 2013, 08:17 AM

rpjg1975 I thought the original was... 20th November 2013, 11:02 AM

rpjg1975 If you are using a sierra... 20th November 2013, 11:06 AM

K4KEV I think it depends on the... 20th November 2013, 12:09 PM

rpjg1975 Yeah, could well do kev. I... 20th November 2013, 12:31 PM

K4KEV Well, I have another wee... 13th January 2014, 08:24 PM

jason 82 Well done Kevo ! That middle... 13th January 2014, 08:56 PM

flyerncle When are you fitting a heater... 14th January 2014, 08:34 AM

twinturbo If it's toughend glass you... 14th January 2014, 05:07 PM

K4KEV Jase.....could be bud then... 15th January 2014, 01:06 AM

twinturbo If it's toughened then it... 15th January 2014, 07:39 AM

rpjg1975 Chatting to my mate last... 15th January 2014, 08:44 AM

ayjay If you want toughened glass... 15th January 2014, 11:29 AM

flyerncle Company called Spartan do... 15th January 2014, 07:39 PM

K4KEV Gonna start getting ready for... 22nd February 2014, 11:47 AM

skov Looks interesting! Just to... 22nd February 2014, 12:22 PM

K4KEV It better bluddy hadn't... 22nd February 2014, 12:52 PM

skov Ah, you're should be alright... 22nd February 2014, 01:25 PM

K4KEV So I have started with the... 24th February 2014, 01:49 AM

K4KEV Made the slice in the 90... 24th February 2014, 05:05 PM

K4KEV Not far to go now, have... 26th February 2014, 01:15 PM

K4KEV All fully welded up bar the v... 28th February 2014, 01:37 PM

flyerncle Nice one as usual ,did you... 28th February 2014, 02:30 PM

K4KEV Ooops sorry Paul ...I meant... 28th February 2014, 02:40 PM

flyerncle Brilliant,no worrys I will be... 28th February 2014, 02:56 PM

K4KEV Right ....have been having a... 2nd March 2014, 09:02 PM

TheArf Can't you get a cream for... 3rd March 2014, 08:42 AM

flyerncle Beat me to it,damn :p 3rd March 2014, 10:16 AM

TheArf first up best dressed 3rd March 2014, 10:39 AM

K4KEV Now if I start putting... 3rd March 2014, 11:28 AM

flyerncle Nothing better to do... 3rd March 2014, 11:32 AM

K4KEV Well the number of radiators... 11th March 2014, 11:00 PM

TheArf Does anyone manufacture an... 12th March 2014, 08:46 AM

voucht Hi Kev, It might be time to... 12th March 2014, 10:24 PM

K4KEV You should know me by now... 13th March 2014, 01:33 AM

voucht Sorry about that Kev. I... 13th March 2014, 07:07 AM

flyerncle No room for the driver... 13th March 2014, 08:40 AM

K4KEV A couple of days ago I hit on... 19th March 2014, 11:40 AM

K4KEV Started to install my oil... 23rd March 2014, 10:02 PM

K4KEV Small disaster.....when... 27th March 2014, 11:51 AM

K4KEV Hi guys....it has taken me... 28th April 2014, 04:40 PM

vmax1974 Ooo ooo me me please 28th April 2014, 07:06 PM

Davidbolam I would love a trip mate.... 28th April 2014, 07:41 PM

flyerncle If you need some... 28th April 2014, 08:26 PM

vmax1974 Like that idea will be good... 28th April 2014, 08:52 PM

K4KEV Got some more stuff done on... 5th May 2014, 08:10 PM

K4KEV Should have done this ages... 28th May 2014, 02:09 PM

vmax1974 Its looking awesome kev have... 28th May 2014, 08:37 PM

flyerncle Few bits of metal,metal glue... 29th May 2014, 08:06 AM

K4KEV I finally have all my bits to... 30th May 2014, 11:59 AM

flyerncle "This summer " what... 30th May 2014, 12:51 PM

vmax1974 he knows what it feels like... 30th May 2014, 01:58 PM

vmax1974 kev i will dust my goggles... 30th May 2014, 02:00 PM

flyerncle Roadster? Red Missile......... 30th May 2014, 02:48 PM

K4KEV Just a little tip for anybody... 5th June 2014, 03:53 PM

K4KEV got some el cheapo gauges... 6th June 2014, 08:59 PM

MikeB they look good for cheapies,... 9th June 2014, 10:54 AM

K4KEV here you go... 9th June 2014, 02:40 PM

K4KEV here they are in the car... 9th June 2014, 02:51 PM

TheArf they look well tidy Kev 10th June 2014, 08:52 AM

flyerncle E-Bay or Heath Robinson Ltd... 10th June 2014, 10:45 AM

Davidbolam Thank you! 13th June 2014, 09:24 AM

K4KEV Arf.....they aren't half bad... 13th June 2014, 05:31 PM

K4KEV I am afraid in my quest for... 22nd July 2014, 07:11 AM

flyerncle Can you get high... 22nd July 2014, 08:29 AM

robo I have a nest of new turbo`s... 22nd July 2014, 10:11 AM

K4KEV Awesome Bob might be handy to... 22nd July 2014, 10:19 AM

flyerncle Find the relief valve,there... 22nd July 2014, 12:52 PM

robo I have just had a quick look... 22nd July 2014, 10:20 PM

K4KEV CORE he he:D :D ......wish I... 23rd July 2014, 01:34 PM

K4KEV Good news guys....I is back... 27th July 2014, 08:36 PM

flyerncle Wingate,we have lift... 28th July 2014, 10:49 AM

K4KEV Ok...not been doing much... 3rd October 2014, 10:39 PM

Davidbolam Looking good kev. I would be... 4th October 2014, 01:50 PM

vmax1974 i would be up for a meet up... 4th October 2014, 04:58 PM

flyerncle Rectal funnel ?:p 5th October 2014, 11:26 AM

flyerncle Cant/wont promise anything... 5th October 2014, 11:30 AM

K4KEV Ok seems enough interest will... 5th October 2014, 11:40 AM

K4KEV About time I put some effort... 14th March 2015, 09:38 AM

SeriesLandy I'm looking forward to the... 14th March 2015, 10:24 PM

K4KEV Well here we go then... 15th March 2015, 11:14 AM

flyerncle Does her in doors know part... 16th March 2015, 10:03 AM

K4KEV More progress on the... 6th May 2015, 11:56 PM

K4KEV and some... 6th May 2015, 11:58 PM

K4KEV and yet... 7th May 2015, 12:02 AM

flyerncle Welcome to Blue Peter !:p... 7th May 2015, 08:56 AM

SteveH1 Jus spent the last 3 days... 7th June 2015, 07:41 PM

K4KEV Ho hum....been a while since... 30th September 2016, 05:28 PM

The V8 Files Fingers crossed for you Kev 30th September 2016, 08:46 PM

vmax1974 Hope its ok kev 30th September 2016, 08:53 PM

garyt not good after all that work... 1st October 2016, 06:38 PM

flyerncle Bad crack Kev,make an adapter... 3rd October 2016, 01:51 PM

K4KEV Wow its been a while... 16th May 2017, 07:54 PM

twinturbo what was the prognosis on the... 24th May 2017, 09:12 PM

K4KEV Ahhhh, as feared a snapped... 25th May 2017, 09:20 AM

K4KEV Decided to change the look of... 15th September 2017, 07:37 PM

Ianr Looks like you are another... 15th September 2017, 10:17 PM

K4KEV Yikes PB is now total sh*te... 16th September 2017, 09:44 AM

Ianr I like the wheel arch... 16th September 2017, 10:26 AM

K4KEV Yeah stainless steel is so... 16th September 2017, 10:33 AM

rpjg1975 Now there's a... 17th September 2017, 11:33 PM

K4KEV Well guys I cannot believe I... 20th November 2017, 05:23 PM

voucht ... and a car stereo :D :D :D... 20th November 2017, 06:26 PM

K4KEV Hiya Syl just feel it was... 20th November 2017, 06:48 PM

K4KEV very detailed description now... 21st November 2017, 02:20 PM

K4KEV Ok been a while but decided... 1st May 2018, 08:09 PM

K4KEV I decided the roadster was... 14th May 2018, 05:29 PM

twinturbo You will be putting in power... 16th May 2018, 06:21 PM

K4KEV Lol TT actually I have a few... 17th May 2018, 11:56 AM

K4KEV Moved onto the drivers side... 17th May 2018, 02:54 PM

K4KEV Nearly finished ....just the... 18th May 2018, 08:00 PM

K4KEV Good progress today almost... 19th May 2018, 08:51 PM

K4KEV Finding some great uses for... 26th May 2018, 11:31 PM

K4KEV Another stainless waste bin... 28th May 2018, 07:35 PM

Ianr How are you getting the edges... 29th May 2018, 08:18 AM

K4KEV Hi Ian...well first off it is... 30th May 2018, 10:21 AM

K4KEV Started fitting bottom edge... 31st May 2018, 07:04 PM

twinturbo I binned my old bin after it... 2nd June 2018, 07:40 PM

K4KEV Ha Ha....I throw nowt out... 4th June 2018, 10:56 AM

K4KEV other side done now... 5th June 2018, 08:00 PM

Ricky Hi kev what size alloys do... 17th June 2018, 11:46 AM

K4KEV Hi Ricky....they are 17"... 18th June 2018, 10:44 AM

Ricky Thanks for the info the other... 18th June 2018, 11:15 AM

K4KEV At the time, I just wanted to... 18th June 2018, 05:05 PM

Ricky Ok cool . So I'm thinking of... 18th June 2018, 05:27 PM

K4KEV If it was me Ricky I would... 19th June 2018, 12:16 PM

Ricky Ok thanks kev for the info... 19th June 2018, 12:31 PM

K4KEV Bin up to blinging again... 20th June 2018, 07:04 PM

K4KEV BACK ON EBAY... 23rd June 2018, 12:25 PM

K4KEV And again this time its an... 25th August 2018, 01:06 PM

K4KEV Roadster up on Ebay for the... 13th October 2018, 11:35 AM

twinturbo I would just wait til... 13th October 2018, 01:59 PM

K4KEV I know TT but the tax runs... 13th October 2018, 04:14 PM

norton If I was you I'd do what I... 13th October 2018, 07:38 PM

K4KEV Hi guys my lil red roadster... 23rd June 2019, 12:35 PM

Davidbolam I like your idea of making a... 16th September 2013, 08:10 PM

CTWV50 Great idea I think I'll use... 15th September 2013, 11:56 AM

flyerncle Bit of a dillema Kev and now... 7th February 2013, 06:30 PM

K4KEV Nearly got my sump finished... 11th November 2012, 06:08 PM

minicountryman1961 more plating advice. 14th March 2011, 10:23 PM

K4KEV Hi Mcm Check out my other... 14th March 2011, 11:11 PM

twinturbo Oooh... Black and red, will... 24th June 2010, 09:15 AM

spud69 Thats a good start Kevin -... 24th June 2010, 10:00 AM

tkpm Thanks to Andy, I have my red... 24th June 2010, 10:15 AM

Eternal Fantastic another nissan... 24th June 2010, 10:35 AM

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode